CV. Sinar Mudjur: Pump & Accessories

ELEPON

Strong suction and feed capacity, simple construction with no valves. Optimum for highly viscous substances, highly concentrated substances, sludge, slurry, chemicals, and substances containing solids and fibers, etc.


Model ETK-12	Model ETK-19	Model ETK-25-1	Model ETK-25-2

Model ETK-32	Model ETK-42	Model ETK-85	Model ETK-100

Features
This pump has a powerful suction (760 mmHg) (water column 9.5m) and feeding capacity (max. 25 kg/cm²) and can both self-prime and force-feed at the same time. It can self-prime and force-feed most substances as long as there is fluidity.
Not only can it self-prime and force-feed fluids, but also highly viscous substances (50,000 mPa_s), highly concentrated substances (special chemicals), and poor fluidity substances containing solids and fibers, and there is no problem even if air is sucked in with the fluids.
Unloaded operation is OK.
The tube has excellent corrosion and friction resistance, and because the fluid touches nothing other than the tube, there is no need to worry about leaks, etc.
Applications
Chemicals (alkali liquids, adhesives, polishing fluid, sludge, slurry, etc.)
Foodstuffs (soybean paste, seaweed, chocolate, saltwater, etc.)
Construction materials (ready-mix concrete, mortar, clay, etc.)
Effluent treatment (husbandry effluent, dirty water, etc.)
Other (pulp chips, old paper, etc.)

<Model ETK-12/Model ETK-19/Model ETK-25-1/Model ETK-25-2>
	Model ETK-12	Model ETK-19	Model ETK-25-1	Model ETK-25-2
Standard discharge volume /min (at0.1MPa)	1.82/min (34r.p.m.)	3.94/min (36r.p.m.)	8.00/min (36r.p.m.)	10.0/min (36r.p.m.)
Electric motor power Standard	90W	0.2kW	0.4kW	0.4kW
Standard discharge pressure (max.)MPa	0.7	0.9	0.9	0.6
Max.vacuum pressure KPa	-99	-99	-100	-100
Tube inside diameter Connection Aperture	12	19	25	25
Connector aperture	PT 1/4 male threads	PT 3/4 male threads	38 hose	38 hose

<Model ETK-32/Model ETK-38/Model ETK-42/Model ETK-50>
	Model ETK-32	Model ETK-38	Model ETK-42	Model ETK-50
Standard discharge volume /min (at0.1MPa)	22.6/min (35r.p.m.)	30.3/min (35r.p.m.)	42.6/min (35r.p.m.)	69.4/min (35r.p.m.)
Electric motor power Standard	1.5kW	1.5kW	2.2kW	3.7kW
Standard discharge pressure (max.)MPa	1.0	1.0	1.0	1.0
Max.vacuum pressure KPa	-101	-101	-101	-101
Tube inside diameter Connection Aperture	32	38	42	50
Connector aperture	38 hose	38 hose	50 hose	50 hose

<Model ETK-65/Model ETK-85/Model ETK-100>
	Model ETK-65	Model ETK-85	Model ETK-100
Standard discharge volume /min (at0.1MPa)	116/min (31r.p.m.)	245/min (30r.p.m.)	420/min (30r.p.m.)
Electric motor power Standard	3.7kW	5.5kW	7.5kW
Standard discharge pressure (max.)MPa	0.7	0.5	0.5
Max.vacuum pressure KPa	-101	-101	-101
Tube inside diameter Connection Aperture	65	85	100
Connector aperture	65 hose	100 hose	100 hose

The lightweight pump can be easily transported and comes in polypropylene and stainless
steel models to provide excellent corrosion resistance.
These can be widely used for a variety of chemicals.


CB-230J CB-230JS CB-230JF	CB-360S	CB-360SA	CB-360/360F	CB-550SA	CB-550S

Features
Compact size saves space and lightweight makes it easy to handle.
Polypropylene and stainless steel models are provided to guaranty excellent corrosion resistance with
    use from strong acids and strong alkalis to solvents.
CB-550S and SA Series have been completed for use with medium viscosity liquids up to 10,000 CP.
A pneumatic motor is used as the power source, so the pump can be safely used to pump flammable
    liquids without the danger of causing an explosion. (CB-360SA)
The pumped liquid is used as the lubricant, and an unique seal-less construction formed by an air shaft
   seal forms a perfect shaft seal. (Models CB-360, 360S, 160N)

Applications
Dividing, pumping, and filling of liquid chemicals in plating plants, chemical plants, chemical warehouses, etc.
Sanitary pumping of drinks and fermentation products, etc., in food processing plants
Pumping and filling of chemicals in food processing plants, metal factories, effluent processing plants, etc.
Testing
Chemical filling in laboratories and hospitals
Pumping of other industrial wastes
Photo developer

Applicable chemicals
Polypropylene	Stainless Steel
Sulfuric acid Hydrochloric acid Chromic acid Acetic acid Sodium hydroxide Ammonia Sodium hypochlorite Other strong acids Alkali solutions	Trichlene Ethanol Phosphoric acid Hydrogen peroxide Nitric acid Ferrous sulfate Sodium sulfite Photo developer Organic solvents Foodstuffs Medium- and high-viscous fluids

	CB-230J	CB-230JS	CB-230JF	CB-360	CB-360F	CB-360S	CB-360SA
	Acid- Resistant and Alkali- Resistant Polypropylene	Stainless Steel	PVdF	Acid- Resistant and Alkali- Resistant Polypropylene	PVdF	Stainless Steel	Pneumatic Motor Powered Stainless Steel
Discharge outlet aperture	19mm	12mm hose nipple	19mm hose nipple	20mm hose nipple		G3/4"
Power source	100 V 230 W			Motor, single-phase 100 V 350W			Compressor Required power Intermittent 3PS or more Continuous 7PS or more
Max. discharge volume(ℓ/min)	30@			75		100	90
Max. head im)	5	7.5	4.5	8			11
Max. usage temperature iŽj	45	60		50	80
Max. allowable viscosity imPaEsj	200			230
Weight ikgj	1.8	2.6	1.8	3.3	3.3	5.3	4.5
Accessories	φ19 braided hose1.5m	φ12 Fluorine-based resin hose1.5m	φ19 Fluorine-based resin hose1.5m	φ19 braided hose3m	φ19 Fluorine-based resin hose 2m	φ25 PP hose with SUS wire 1.5m	φ25 PP hose with SUS wire 1.5m

	CB-550S-B	CB-550S-F	CB-550SA-B	CB-550SA-F
	High-Viscous Fluids Stainless Steel
Discharge outlet aperture	32 hose nipple (G 1 1/4")
Power source	Motor, single-phase 100 V 350W		Driven by air motor Air pressure 0.3 to 0.6MPa
Max. discharge volume (ℓ/min)	21
Max. head iMPa)	0.4	0.2	0.5	0.2
Max. usage temperature iŽj	60Ž	80Ž	60Ž	80Ž
Max. allowable viscosity imPaEsj	5,000		10,000
Weightikgj	7.4		6.5
Accessories	φ32 braided hose 1.5m	φ32 PP hose with SUS wire 1.5m	φ32 braided hose 1.5m	φ32 PP hose with SUS wire 1.5m

<Materials Table>
	Impeller	External Tube	Shaft	Seal
CB-230J	ETFE	PP	Hastelloy C	PE
CB-230JS	ETFE	SUS316	SUS-316	PE
CB-230JF	ETFE	PVdF	Hastelloy C	PTFE
CB-360	ETFE	PP	Hastelloy C	PE
CB-360F	ETFE	PVdF	Hastelloy C	PTFE
CB-360S/SA	ETFE	SUS-316	SUS-316	PE/PTFE

Digital Flow Meter (FMC Model)

The F716 Series pumps are low-cost in-tank corrosion resistant vertical pumps made of one of two different types of materials, polypropylene (PP) and polyvinylidene difluoride resin (PVdF).
Pump material PP (polypropylene)
PVdF (polyvinylidene difluoride resin)


PP (polypropylene)	PVdF (olyvinylidene difluoride resin)

Features
Highly corrosion resistant, maintenance free
Available pump materials are polypropylene (PP) and polyvinylidene difluoride resin (PVdF).

Applications
Liquid chemical circulation for etching machines, etc.
Circulation pumping of plating liquids
Circulation pumping of acid washes
Circulation pumping of exhaust gas absorption tower liquid chemicals
Other liquid chemicals pumped from pits

Model

Discharge
side
aperture
diameter
(INCH)

Max.
flow
volume
(/min)

Max.
head
(m)

Motor

Rated
power
(kW)

Power
supply

Revolution
(min^-1)

F716-

80/115

11/4"

110

0.37

200V
triple
phases

2850

130

11.5

0.55

3420

F716-

100/135

11/2"

170

0.75

2850

90/135

160

16.5

0.75

3420

F716-

110/185

21/4"

500

1.5

2850

600

17.5

2.2

3420

F716-

130/185

600

18.5

2.2

2850

120/185

650

3.0

3420

F716-

140/230

650

23.5

4.0

2850

130/230

750

5.5

3420

PUMP ACCESSORIES

Employs high-precision gears to provide quiet operation. Lightweight, compact, and easy to install.


MKG	MFG	MKM	MFM	MFC

MKM : Portable model for medium to low speeds; gear motor is speed reduction type
MFM : Vertical model for medium to low speeds; gear motor is speed reduction type.
MFC : Vertical model for medium to low speeds; employs cyclo-speed reduction

Features
Choose from a wide variety of models to match your application.
Select the agitator construction material to handle fluids under a variety of conditions.
Quiet, vibration-less operation

Applications
Chemical dissolving tanks
Agglutination tank (high-speed, low-speed, pH adjustment)
Physical and chemical purposes (tests, laboratories, etc.)

<MKG>
Model	Electric motor			Max. Agitation Liquid Capacity
	Power	Horsepower	Voltage	Dilute Liquid	Viscous Liquid
	kW		V
MKG-7HA	0.065	1/12	100	400	100
MKG-10HA	0.1	1/8	100	600	200
MKG-10H	0.1	1/8	200	600	200
MKG-20HA	0.2	1/4	100	1200	400
MKG-20H	0.2	1/4	200	1200	400
MKG-40H	0.4	1/2	200	2500	800
MKG-75H	0.75	1	200	5000	1500
MKG-150H	1.5	2	200	10000	3000
MKG-220H	2.2	3	200	15000	5000

TOP

<MFG>
Model	Electric motor		Max. Agitation Liquid Capacity
	Power	Horsepower	Dilute Liquid	Viscous Liquid
	kW
MFG-10H	0.1	1/8	600	200
MFG-20H	0.2	1/4	1200	400
MFG-40H	0.4	1/2	2500	800
MFG-75H	0.75	1	5000	1500
MFG-150H	1.5	2	10000	3000
MFG-220H	2.2	3	15000	5000

Simple to install, lightweight, and compact. Employs an outdoor motor.

KVO
2508/ 2515/
2530/ 4008/
4015/ 4030/
6008/ 6015/
6030/ 9008/
9015/ 9030

KVS
0408/ 0413/
0435/ 0608/
0613/ 0635/
1008/ 1013/
1035/ 2008/
2013/ 2035/
4008/ 4013

KVO Model Specifications Table
@	Electric motor	Shaft	Vanes	Mounting flanges dimensions (mm)				External dimensions				Estimated weight
	Power W	Shaft diameter x length d x Lmm	2 paddles Dmm	JIS size	Outside diameter O.D	Pitch P.C.D	Bolt hole Z	A mm	B mm	C mm	H mm	kg
KVO-2508	25	12 x 450	100	JIS 5K 65A	155	130	14	117	78	15	195	3.5
KVO-2515			150									4.0
KVO-2530			200					128			206	5.0
KVO-4008	40	12 x 600	150					147			225
KVO-4015			200									5.5
KVO-4030			250					165			243	6.0
KVO-6008	60	12 x 700	200					185			263
KVO-6015			250									6.5
KVO-6030			300									7.0
KVO-9008	90	12 x 900	250					200			278
KVO-9015			300									7.5

*The shaft length is variable (however, there is a maximum limit).

Selection Chart (For a viscosity of 1 mPa_s and specific gravity of 1.0)
Revolution(50/60Hz)		200/240 r.p.m.	100/120 r.p.m.	50/60 r.p.m.
Tank capacity ()	Motor (W)	Model	Model	Model
For 50 to 100	25	KVO-2508	KVO-2515	KVO-2530
For 100 to 200	40	KVO-4008	KVO-4015	KVO-4030
For 200 to 300	60	KVO-6008	KVO-6015	KVO-6030
For 300 to 500	90	KVO-9008	KVO-9015	KVO-9030

KVS Model Specifications Table

Electric
motor

Shaft

Vanes

Mounting flanges
dimensions (mm)

External
dimensions

Estimated
weight

Power
W

Shaft
diameter
x length
d x Lmm

2
paddles
Dmm

JIS
size

Outside
diameter
O.D

Pitch
P.C.D

Bolt
hole
Z

A
mm

B
mm

C
mm

H
mm

KVS-0408

12 x 450
(12 x 600)

150 x 1
level

JIS
5K
65A

155

130

261

5.5

KVS-0413

200 x 1
level

KVS-0435

300 x 1
level

KVS-0608

12 x 700

200 x 1
level

6.0

KVS-0613

250 x 1
level

KVS-0635

350 x 1
level

KVS-1008

100

18 x 1000

50Hz
250 x 2
levels
60Hz
230 x 2
levels

JIS
10K
65A

175

140

318

105

330

11.5

KVS-1013

300 x 2
levels

KVS-1035

400 x 2
levels

12.0

KVS-2008

200

18 x 1200

50Hz
300 x 2
levels
60Hz
270 x 2
levels

338

400

13.0

KVS-2013

350 x 2
levels

13.5

KVS-2035

20 x 1200

450 x 2
levels

363

470

14.5

KVS-4008

400

20 x 1400

50Hz
350 x 2
levels
60Hz
320 x 2
levels

16.0

KVS-4013

400 x 2
levels

*The shaft length is variable (however, there is a maximum limit).

Selection Chart (For a viscosity of 1 mPa_s and specific gravity of 1.0)
Revolution(50/60Hz)		188/225 r.p.m.	115/138 r.p.m.	43/51 r.p.m.
Tank capacity ()	Motor (W)	Model	Model	Model
For 50 to 100	40	KVS-0408	KVS-0413	KVS-0435
For 100 to 200	60	KVS-0608	KVS-0613	KVS-0635
For 200 to 500	100	KVS-1008	KVS-1013	KVS-1035
For 500 to 1000	200	KVS-2008	KVS-2013	KVS-2035
For 1000 to 2000	400	KVS-4008	KVS-4013	-

System Tank The agitator and pump can be set in the chemical tank.
Features The agitator and metering pump can be easily set in the tank. Sturdy construction and excellent chemical resistance. Withstands impacts and does not expand.

<KVO / KVS Model>

	Model KVO	Model KVS
Motor	Indoor model 200 V (triple phases) or 100 V (single phase)	Outdoor model 200 V (double phases) or indoor model 100 V (single phase)
Material that contacts liquid	SUS 304
Mounting flange surface	With PVC plate JIS 5K 65A	JIS 5K 65A(40W60W) JIS 10K 65A(100W400W)
Vanes	2 vanes: 45 paddles x 1 level	2 vanes: 45 paddles 40W60W 1 level/100W400W 2 level
Shaft seal	Open

Selection Chart (For a viscosity of 1 mPa_s and specific gravity of 1.0)
Revolution(50/60Hz)	200r.p.m./240 r.p.m.		Metering pump
Tank capacity ()	Model	Motor(W)	Model	Motor(W)
50	KVO-2508	25	CRM-0224	25
100	KVO-4008	40	CRM-0204	25
200	KVO-6008	60	CR-1N3N	100
300	KVS-1008	100	CR-1N3N	100
500	KVS-2008	200	CR-1N3N	100

1 For information regarding the metering pump specifications, refer to the appropriate catalog.
2 The pump models are the recommended models, so other pumps can also be installed.
3 There is no pump mounting holes on the pump frame of the system tank. Please make holes as needed.

The water depth and vertical and horizontal changes can be freely made.
Maintenance is easy and a highly effective agitator is used.


ESA-250	ESA-300	ESA-1.5C

Features
Wide range of models allows you to select the pump needed for your applications.
Can handle high specific gravity and highly viscous substances.
Quiet operation sound and no vibration.

Applications
Used for agitation, mixing, dissolving, dispersion, anti-sedimentation, anti-freezing, concentration uniformity, temperature uniformity, water flow generation, etc. of industrial effluent treatment equipment, water supply and sewage treatment equipment, agriculture and husbandry, aquaculture, rivers and civil engineering.

<Standard Specifications>

Agitator Model
Motor

ESA-250

ESA-300

ESA-1.5C

Motor

Type

Dry, underwater type

Dry, underwater type
with speed reducer

Power

1.2kW

3.3kW

1.5kW

Number of
electrodes,
insulation
Frequency

Type 6, Type B

Type 4, Type B

Frequency (Hz)

Voltage (V)

200

220

200

220

200

220

Rated current (A)

7.4

6.9

16.5

15.5

7.5

6.5

6.4

Synchronous
revolution (rpm)

1000

1200

1000

1200

100

120

Built-in
protective unit

Automatic cutoff

Materials

Frame

FC200

Shaft

SUS304

SUS420J2

SUS316

Cable

VCT 10m

2PNCTS 10m

2PNCT 10m

Operation
liquid

Liquid qualities

Slurries, sludges, and general fluids

513

Liquid temperature

040

Max. usable depth

30m

Agitator

Shaft sealing unit

Double type mechanical seal

Shaft seal sealing fluid

Turbine oil ISO VG32

Materials

Propeller

High-chrome cast iron

SS400 hot dip zincing

Guide ring

SS400 hot dip zincing

Seal housing

FC200

Shaft
seal

Motor
side

SiC x SiC

Ceramic x BC

Propeller
side

SiC x SiC

Ultra hard x ultra hard

Weight (Not including cable)

34kg

80kg

77kg

Accessories

Materials

Guide slider

SS400 hot dip zincing

Bracket

SS400 hot dip zincing

Chain

SUS304

TOP

<Specifications>
Model	ESA-250						ESA-300						ESA-1.5C
Frequency (Hz)	50			60			50			60			50	60
Propeller pitch (mm)	90	110	130	90	110	130	130	160	200	130	160	200	1010	1010
Propeller outside diameter (mm)	240	240	240	240	240	240	280	280	280	280	280	280	870	790
Propeller outlet average flow speed (m/s)	0.93	1.11	1.32	1.08	1.34	1.52	1.41	1.72	2.02	1.64	2.04	2.36	0.89	1.00
Flow volume (m³/min)	2.8	3.4	4.0	3.3	4.1	4.6	6.2	7.5	8.8	7.2	8.9	10.3	34.9	32.4
Shaft power when using pure water (kW)	0.38	0.42	0.44	0.54	0.59	0.62	1.0	1.2	1.5	1.5	1.8	2.3	0.93	1.28
Current value when using pure water (A)	4.0	4.1	4.2	3.5	3.6	3.7	9.3	9.7	10.5	8.5	9.1	10.5	5.6	5.6
Reaction force (N)	44	62	88	59	91	118	145	220	300	200	305	410	470	490

Excellent safety and corrosion resistance
In addition to great ease of use, there is a wide selection of tanks to meet different requirements.


Hard PVC tank (with agitator rack mounts)	Hard PVC tank (with PVC agitator rack mounts)	Hard PVC tank (with metering pump mounts)

Polyethylene Tank (with metering pump mounts)	Large Polyethylene Tanks (Sealed Cylindrical Tank Type A)

Features
Features of a hard PVC tank are excellent corrosion resistance and lightweight and good sanitation to satisfy the requirements for a variety of applications. These tanks can be combined with metering pumps and agitators to further expand possible applications. Capacities range from 50 to 1,000 liters to allow selection to fit the required application.
Features of polyethylene tanks are excellent chemical resistance, impact resistance, and ability to be used in poor environments. These tanks have also been shown to have excellent corrosion resistance.

<Hard PVC tanks (with agitator rack mounts, PVC agitator rack mounts, and metering pump mounts)> Unit : mm
	Capacity	50	100	200
	Symbol/A	360	440	500
	Symbol/B	360	440	500
	Symbol/C	460	610	930
	Symbol/D	540	690	1,010
	Symbol/E	131	154
	Wall thickness	3	4
	Weight (kg)	8	14	24

TOP

<Hard PVC tanks (with agitator rack mounts, PVC agitator rack mounts, and metering pump mounts)> Unit : mm
Capacity	300	500	1,000
Symbol/A	600	740	1,066
Symbol/B	600	740	1,066
Symbol/C	970	1,010
Symbol/D	1,050	1,090
Symbol/E	154	d x d' 300 x 200	d x d' 400 x 300
Wall thickness	5		6
Weight (kg)	34	46	97

TOP

<Polyethylene Tanks (with metering pump mounts)> Unit : mm
	Capacity	50	100
	Symbol/A	380	460
	Symbol/B	380	460
	Symbol/C	570	700
	Symbol/D	610	740
	Symbol/E	137
	Weight (kg)	10	15

TOP

<Large Polyethylene Tanks (Sealed Cylindrical Tank Type A)> Unit : mm
	Capacity	200	300	500	1,000	2,000
	Symbol/ diameter D	655	750	900	1,065	1,425
	Symbol/H1	660	800	900	1,255	1,570
	Symbol/H2	755	910	1,010	1,400	1,785
	Manhole diameter 450	250 Handhole			Available

Capacity	3,000	4,000	5,000	6,000	8,000
Symbol/ diameter D	1,620	1,815		2,020	2,145
Symbol/H1	1,650	1,815	2,095	2,085	2,540
Symbol/H2	1,850	2,055	2,335	2,340	2,830
Manhole diameter 450	Available

Capacity	10,000	15,000	20,000	30,000
Symbol/ diameter D	2,350	2,650	2,850	2,930
Symbol/H1	2,630	3,130	3,460	5,000
Symbol/H2	2,900	3,460	3,830	5,400
Manhole diameter 450	Available

Simultaneously displays both measurement values and parameter setting values. A series that can be installed outdoors is also available. Simple operation provides better ease of use.

Digital type pH (ORP)

EPC-96AC
EPC-96ACT

On-site pH (ORP) meter
EPC-100AC

Analog type pH (ORP)

pH Recorder
Model EPR

pH display controller
Model EPC-1/Model EPC-2(Model EOC-2)

Other models

EEC-96AC(Conductivity meter [for low concentrations])
EHC-96AC(Conductivity meter [for high concentrations])
EDC-96AC(Dissolved oxygen meter)
ERC-96AC(Residual chlorine meter)

EPC-96AC
Simultaneous display of setting values and parameter setting values.
Being able to call up settings and setting values while checking measures provides greater convenience. This also makes operation simpler.
One-touch calibration
Just insert the electrode into a standard solution and press the CAL key. The microprocessor recognizes the type of standard solution and then the potential stability determination function automatically performs calibration to match the temperature characteristics of the standard solution. In addition, manual calibration can also be performed by changing the panel switch position.
Flexible power source
Supports a wide range of voltages from AC 90 to 260 V.
Functions as both a pH and ORP meter
Can be used as either a pH meter or an ORP meter by changing the panel switch position.
Memory backup
Data on the settings and calibration values is stored inside the meter each time it is updated. So it is not lost even when the power is turned off. When the power is turned on again, measurement is started using the data stored in memory.
Wide transmission power range
The transmission power scope can be selected from 8 ranges for pH and 8 ranges for ORP.
Automatic determination of whether electrode characteristics are good/bad
When calibration is performed, the meter uses the asymmetry potential, sensitivity, and reaction speed to automatically determine whether the electrode is good or bad, and then displays a corresponding error message. During measurement, error messages, such as outside measurement range error, temperature sensor short-circuit, circuit open, etc., are displayed.
Simple and accurate operation

EPC-96ACT
Advanced time shared proportional control functions
F zone functions
Control output shift functions

EPC-100AC
Advanced functions and easy operation
Rain-proof model can also be installed outdoors.

Analog type pH (ORP) display controller
Model EPC-1/ Model EPC-2 (Model FOC-2)
This is an industrial pH (adjustment) controller that employs a super high input impedance IC to provide high reliability and safety.
The controller mechanism employs an electronic relay to provide extremely high control accuracy.

pH recorder/controller Model EPR
This is an industrial pH (ORP) recorder that employs a super input impedance IC to provide high reliability and safety.
The controller mechanism employs an electronic relay to provide high control accuracy. In addition,
it also has a built-in automatic temperature compensation circuit to prevent measurement error due to changes in liquid temperature.

ƒEPC-96AC EPC-96ACT EPC-100AC„
	EPC-96AC	EPC-100AC	EPC-96ACT
Measurement range	pH 014 : resolution 0.01pH ORP 1400mV : resolution 1mV	pH 014 : resolution 0.01pH ORP 2000mV : resolution 1mV	pH 014 : resolution 0.01pH ORP 1400mV : resolution 1mV
Reproducibility	pH 0.05 ORP 5mV	pH 0.05 ORP 5mV	pH 0.05 ORP 5mV
Transmission output scope	DC 420mA (insulated I/O model) Max. load resistance 500 Linearity 0.5%	DC 420mA (insulated I/O model) Max. load resistance 500 Linearity 0.5%	DC 420mA(insulated I/O model) Max. load resistance 500 Linearity 0.5%
Transmission output range	pH : 014,010,08,212, 311,414,410,614 ORP : 1400mV,1000mV, 700mV,350mV,-10000mV, 01000mV, -7000mV,0700mV (Selected by changing the panel DIG switches)	pH : 014,010,08,212, 311,414,410,614 ORP : 2000mV,1400mV, 1000mV,700mV,350mV, -10000mV,01000mV, -7000mV,0700mV (select by changing the internal panel DIG switches)	pH : 014,010,08,212, 311,414,410,614 ORP : 1400mV,1000mV, 700mV,350mV,-10000mV, 01000mV, -7000mV,0700mV (Selected by changing the panel DIG switches)
Control functions	IC contact point output 2-CH independent Capacity : AC 250V,3A max(Resistance load)	IC contact point output 2-CH independent Capacity : AC 250V,3A max(Resistance load)	IC contact point output 2-CH independent Capacity : AC 250V,3A max (Resistance load)
Control operation	ON/OFF control Upper limit operation (Hi) or lower limit operation (Lo) (selected by changing the panel DIP switches) Upper/lower limit setting range pH meter 0.0014.00pH ORP meter 01400mV Scope of control pH meter 0.14.0pH (0.12.0pH) ORP meter 1999mV (1499mV) (When the proportional range is 0, only ON/OFF control is valid)	Upper/lower limit setting range pH meter 0.0014.00pH ORP meter 02000mV Scope of control pH meter 0.14.0pH (0.12.0pH) ORP meter 1999mV (1499mV)	Time shared proportional ON/OFF control Upper limit operation (Hi) or lower limit operation (Lo) (selected by changing the panel DIP switches) Upper/lower limit setting range pH meter 0.0014.00pH ORP meter 01400mV Proportional range pH meter 0.004.00pH (Begins ON/OFF control when set to 0.00) ORP meter 0400mV (Begins ON/OFF control when set to 0) Period 5O to 300 secs Scope of control pH meter 0.14.0pH (0.12.0pH) ORP meter 1999mV (1499mV) (When the proportional range is 0, only ON/OFF control is valid) Control output shift function Shift amount is 0 to 50% of period (When shift amount = 0%, shift function disappears) Period automatic variation function When deviation enters in the specific range (F zone), the period T is automatically extended in accordance with the deviation. (This does not operate when the shift function is valid.) F zone 1 to 50% of pH meter proportional range, 1 to 50% of ORP meter proportional range (If the deviation is within the above setting, the period automatic variation function will operate.) Period max. extension time 0 to 300 secs
Calibration functions	2-point automatic calibration or manual calibration (select by changing the positions of the internal panel DIP switches) 2-point automatic calibration Automatic standard solution identification, automatic potential stability determination, standard solution types pH 4, 7, 9 (JIS), standard solution combinations (pH 4, 7) (pH 7, 9) Manual calibration: Standard solution types Recognition: Difference of 2 or more in pH level	2-point automatic calibration or manual calibration (select by changing the positions of the internal panel DIP switches) 2-point automatic calibration Automatic standard solution identification, automatic potential stability determination, standard solution types pH 4, 7, 9 (JIS), standard solution combinations (pH 4, 7) (pH 7, 9) Manual calibration: Standard solution types Recognition: Difference of 2 or more in pH level	2-point automatic calibration or manual calibration (select by changing the positions of the internal panel DIP switches) 2-point automatic calibration Automatic standard solution identification, automatic potential stability determination, standard solution types pH 4, 7, 9 (JIS), standard solution combinations (pH 4, 7) (pH 7, 9) Manual calibration: Standard solution types Recognition: Difference of 2 or more in pH level
Additional functions	Error messages a. Calibration error Asymmetry potential, sensitivity, and reaction speed errors, standard solution error b. Electrode diagnosis error Temperature sensor short-circuit, temperature sensor circuit open c. Outside measurement range error Over/under full scale Corrected pumping force Transmission power connected during calibration, continuous, hold (immediately prior hold, selectable hold) (select by changing the internal panel DIP switches) Measurement value shift function pH : 2.00pH ORP : 200mV	Error messages a. Calibration error Asymmetry potential, sensitivity, and reaction speed errors, standard solution error b. Electrode diagnosis error Temperature sensor short-circuit, temperature sensor circuit open c. Outside measurement range error Over/under full scale Corrected pumping force Transmission power connected during calibration, continuous, hold (immediately prior hold, selectable hold) (select by changing the internal panel DIP switches) Hold contact input during cleaning 1a no voltage contact input (transmission output hold at contact at contact point ON) Measurement value shift function pH : 2.00pH ORP : 200mV Input filter time constant switch function Time constant: None/time constant: Approx. 7 sec (change using internal panel DIP switches)	-
Temperature compensation element	500(25) or 6.8k(25) (select by changing the panel DIP switches)	500(25) Other 6.8k(25), 350(25) 1k(0), 10k(at25) support provided (select by changing the internal panel DIP switches)	-
Temperature compensation range	0100(for pH meter)	0100(for pH meter)	-
Ambient temperature and humidity	-540 85% RH or less	-550 85% RH or less	-
Power supply	AC90260V 50/60Hz 10W	AC100115V 50/60Hz 7VA or AC200240V 50/60Hz 7VA	AC90260V 50/60Hz 10W
Construction	Panel mount : DIN96 x 96 Indoor installation model Case : SPCC Panel : ABS	Outdoor installation model : JIS C0920 Protection class : 3 (Rain-proof) Mounting method : 50 A ball or wall mount Case : Polycarbonate (Resin color: grayish white) Hood : SPCC (Color: comparable to DIC G-262) Mount : SUS 304	Panel mount : DIN96 x 96Indoor installation model Case : SPCC Panel : ABS
Outside dimensions	96(W) x 96(H) x 145(D) Case depth : 135mm	270(W) x 186(H) x 229(D) (Not including mount and protruding portion)	96(W) x 96(H) x 145(D) Case depth : 135mm
Weight	Approx. 650 g	Approx.3kg	Approx.650g

top

<pH Recorder/Controller Model EPR>
	EPR-1S	EPR-420S	EPR-6S
Instruction (control) range	(Instruction control) 0 to 14 pH
Comprehensive accuracy	Within 1% of full scale
Input resistance (signal)	10¹² or more (pH electrode)	250(420mA)	10¹² or more (pH electrode)
Temperature compensation	0 to 100 automatic or fixed resistance of 500	-	0 to 100 automatic or fixed resistance of 500
Method	Electronic equilibrium
Recording width	100mm
Instruction speed	5 sec or less
Recording method	Disposable felt pen
Recording paper speed	10-20-40 mm/H (However, set to 20 mm/H at shipment)
Alarm contact point	1 circuit each for lower and upper limits (A, B contact points)	-
Power supply voltage	AC 100V 50/60Hz
Power consumption	Approx.7VA
Weight	Approx.2kg

top

<Instruction Controller Model EPC-1/Model EPC-2 (Model EOC-2)>
	EPC-1	EPC-2	EOC-2
Instruction control range	0 to 14 pH		700mV
Instruction accuracy	Within 1% of full scale
Input resistance	10¹²or more
Temperature compensation	0 to 100 automatic or fixed resistance		-
Output signal	DC420mA	DC 200A
Control contact point	1 circuit each for lower and upper limits (H,C,L)
Contact output	Resistance load AC 200V 3A
Power supply voltage	AC 100V, 200V 50/60Hz
Power consumption	10VA or less
Weight	Approx.3.3kg

Halaman

Pump & Accessories